IMAGE CLIP® Laser Dark Heat Transfer Papers are designed for the heat
transfer of full color images with oil or oil-less laser color copiers
or color laser printers to dark and bright colored items including:
T-shirts, handbags, mouse pads, coasters, leather articles, art papers,
etc. IMAGE CLIP® Laser Dark works well on cotton, 50-50 blends and
polyester. There is no need to trim the paper. IMAGE CLIP® Transfer
Paper is self-weeding and leaves no background plastic polymer.
1. Mirror the image.
2. Laser print the coated side of the paper identified as the Imaging Sheet.
3. IMAGE CLIP® Laser Dark Paper should be fed into the copier or printer with the short dimension first
(grain long). For best fusing results use a heavy paper setting.
TRANSFER - Use Commercial Heat Press
1. Marry the imaged sheet with the transfer sheet. This will apply the transfer coating to the imaged area.
Press: 20 seconds at 250 F using heavy pressure
Separate the papers while still hot
2. Place the imaging sheet face down onto the shirt or other substrate.
Press: 25 seconds at 375oF using heavy pressure
Cool before peeling. Stretch immediately after peeling if desired
Turn garment inside out and wash in cold water using a mild detergent. Do not use bleach. Dry on low heat setting. Do not iron directly on the transferred area.STORAGE AND HANDLING OF IMAGE CLIP® HEAT TRANSFER PAPERS
Store in a cool, dry area and do not remove from carton or poly bag until you are ready to use.