|
|
|
|
|
|
Geo Knight DKA Universal Stand - FREE SHIPPING
|
List Price: $295.00
Our Price: $295.00
Sale Price: $275.00
You Save $20.00
|
|
|
DKA-STAND
DK Universal Stand
The Digital Knight Universal Stand is an extremely heavy-duty solid steel stand for the following Digital Knight heat press machines: DK20S, DK20SP, DC16, DC16AP, DK20, DK16
It features a heavy steel welded framework, and industrial grade casters. The rolling casters can be locked with the foot pedals, preventing wheel pivoting and movement of the stand.
The stand is quickly & easily assembled, and ships inexpensively by UPS. An excellent add-on for existing machines or new press purchases, all hardware & instructions are included for assembly.
- Weight: 77 Lbs
- Shipped Dimensions: 36" D x 24" W x 8" H
- Assembled Dims: 26" D x 16" W x 29" H
|
|
|
|
|
|
|
|
|
|
|
|
|
Geo Knight DK Twin Shuttle Attachment - FREE SHIPPING
|
List Price: $650.00
Our Price: $650.00
Sale Price: $604.50
You Save $45.50
|
|
|
DKA-TWIN
DK Twin Shuttle Attachment
The Digital Knight Twin Shuttle Upgrade is a dual station Add-On for the DK20S swing away heat press
Everyone knows that long term costs are not in the press equipment but in Labor Costs. Adding a twin shuttle removes wasted operator time waiting for a pressing cycle to finish. It also negates heat platen idle time while waiting for the operator to load and unload. Production is maximized with no additional labor cost.
The shuttle table creates less fatigue than swinging the head as well. Unlike easily tearable teflon 'hammocks', this shuttle is solid machined-flat aluminum, holding any heavy, sharp, and rigid imprintable products without concern. Laying out fabric, shirts and garments is a breeze, with the two 16x20 silicone pads positioned just like the standard table configuration on the press.
For almost double the productivity per single operator, the Digital Knight Twin Shuttle Upgrade is an unbeatable value.
- Weight: 70 Lbs
- Dimensions: 40" D x 21" W x 8" H
|
|
|
|
|
|
|
|
|
|
|
|
|
Geo Knight Digital Knight 16 x 20 Clamshell - FREE SHIPPING
|
List Price: $1,050.00
Our Price: $1,050.00
Sale Price: $976.50
You Save $73.50
|
|
|
DK20
Digital Knight 16x20 Clamshell
Our largest clamshell, the 16x20 DK20 opens for full access to the lower bottom table. It is important to note that the back of the heat platen raises above and away the bottom table, providing better access than other clamshell presses. The frame support allows operators to slide shirts over the table with complete drape space around and underneath the loading area. Interchangeable bottom tables for smaller pressing areas are available. This press is idea for environments with space limitations, and for users who need more portability and mobility than the over-weight swingaway presses.
The DK20 can be easily upgraded to an automatic release press with the "Pop-Up" upgrade. This allows for faster semi-automatic garment production at a very reasonable price. Add to this the twin station upgrade as well, and you have the ultimate clamshell dual station light production machine.
|
|
|
|
|
|
|
|
|
|
|
|
|
Geo Knight DK20 Auto Release Pop Up Upgrade - FREE SHIPPING
|
List Price: $295.00
Our Price: $295.00
Sale Price: $290.00
You Save $5.00
|
|
|
DK20-AUTO
DK20 Auto-Release Pop-Up Upgrade
Available for the DK20 is our new automatic release feature. This amazing high-tech upgrade makes your Digital Knight clamshell act like a semi-automatic, air operated press, without the compressor! Simply close the press as you normally do, and at the end of the digital timing cycle the press releases automatically.
This upgrade is factory installed by a technician at no additional charge when purchased together with the DK20. However, for a pre-existing DK20, customer installation is easy and fast.
|
|
|
|
|
|
|
|
|
|
|
|
|
Geo Knight Digital Knight Twin Shuttle Attachment - FREE SHIPPING
|
List Price: $650.00
Our Price: $650.00
Sale Price: $604.50
You Save $45.50
|
|
|
DKA-TWIN
DK Twin Shuttle Attachment
The Digital Knight Twin Shuttle Upgrade is a dual station Add-On for the DK20 clamshell heat press (with user modification to clamshell frame).
Everyone knows that long term costs are not in the press equipment but in Labor Costs. Adding a twin shuttle removes wasted operator time waiting for a pressing cycle to finish. It also negates heat platen idle time while waiting for the operator to load and unload. Production is maximized with no additional labor cost.
The shuttle table creates less fatigue than swinging the head as well. Unlike easily tearable teflon 'hammocks', this shuttle is solid machined-flat aluminum, holding any heavy, sharp, and rigid imprintable products without concern. Laying out fabric, shirts and garments is a breeze, with the two 16x20 silicone pads positioned just like the standard table configuration on the press.
For almost double the productivity per single operator, the Digital Knight Twin Shuttle Upgrade is an unbeatable value.
Weight: 70 Lbs
Dimensions: 40" D x 21" W x 8" H
|
|
|
|
|
|
|
|
|
|
|
|
|
Geo Knight Digital Knight 14 x 16 Clamshell - FREE SHIPPING
|
List Price: $875.00
Our Price: $875.00
Sale Price: $813.75
You Save $61.25
|
|
|
DK16
Digital Knight 14x16 Clamshell
Our mid-sized clamshell, the 14x16 DK16 opens for full access to the lower bottom table. This press is the lowest cost solution for a business grade heavy-duty Digital heat press machine. It is important to note that the back of the heat platen raises above and away the bottom table, providing better access than other clamshell presses. The frame support allows operators to slide shirts over the table with complete drape space around and underneath the loading area. Interchangeable bottom tables for smaller pressing areas are available. This press is idea for environments with space limitations, and for users who need more portability and mobility than the over-weight swingaway presses.
The DK16 can be easily upgraded to an automatic release press with the "Pop-Up" upgrade. This allows for faster semi-automatic garment production at a very reasonable price.
- Weight: 83 Lbs
- Electrical: 1500W / 12A / 110V
- Dimensions: 32"L x 17"W x 16"H
- (add $35 for 220V international)
|
|
|
|
|
|
|
|
|
|
|
|
|
Geo Knight DK16 Auto Release Pop Up Upgrade - FREE SHIPPING
|
List Price: $295.00
Our Price: $295.00
Sale Price: $290.00
You Save $5.00
|
|
|
DK16-AUTO
DK16 Auto Release Pop-Up Upgrade
Available for the DK16 is our new automatic release feature. This amazing high-tech upgrade makes your Digital Knight clamshell act like a semi-automatic, air operated press, without the compressor! Simply close the press as you normally do, and at the end of the digital timing cycle the press releases automatically.
This upgrade is factory installed by a technician at no additional charge when purchased together with the DK16. However, for a pre-existing DK16, customer installation is easy and fast.
|
|
|
|
|
|
|
|
|
|
|
|
|
Geo Knight Digital Knight 6 x 8 Label Press - FREE SHIPPING
|
List Price: $625.00
Our Price: $625.00
Sale Price: $581.25
You Save $43.75
|
|
|
DK8
Digital Knight 6x8 Label Press
The DK8 label press is a 6x8 small platen heat press. This machine is very popular for label printing and small transfer & applique sealing.
If your image area is less than 8 inches, and you need to specifically isolate an area of a garment or bag, the tall pedestal on the DK8 allows for precise location of just the area needed to be pressed. Pockets, collars, socks, sleeves and similar areas are easy to press without flattening parts of the garment that should not be pressed. This saves the user from pressing very large areas of bulky items unnecessarily, as would happen on a standard T-Shirt press. The included interchangeable tables allow for isolation of the pressing area down to a mere 3x3 inches.
- Weight: 65 Lbs
- Electrical: 600W / 5A / 110V
- Dimensions: 19"L x 12"W x 18"H
- (add $35 for 220V international)
|
|
|
|
|
|
|
|
|
|
|
|
|
Geo Knight Digital Knight 6 x 8 Twin Label Press - FREE SHIPPING
|
List Price: $950.00
Our Price: $950.00
Sale Price: $883.50
You Save $66.50
|
|
|
DK8T
Digital Knight 6x8 Twin Label Press
The DK8T Twin label press is a 6x8 small platen heat press with a high productivity design. The head pivots back and forth between the two pedestals effortlessly. While one side is pressing, the user is able to set up work on the other pedestal and maximize efficiency.
This machine is very popular for label printing and small transfer & applique sealing. If your image area is less than 8 inches, and you need to specifically isolate an area of a garment or bag, the tall pedestal on the DK8 allows for precise location of just the area needed to be pressed. Pockets, collars, socks, sleeves and similar areas are easy to press without flattening parts of the garment that should not be pressed. This saves the user from pressing very large areas of bulky items unnecessarily, as would happen on a standard T-Shirt press. The included interchangeable tables allow for isolation of the pressing area down to a mere 3x3 inches.
Weight: 105 Lbs
Electrical: 600W / 5A / 110V
Dimensions: 22"L x 22"W x 22"H
(add $35 for 220V international)
|
|
|
|
|
|
|
|
|
|
|
|
|
Geo Knight Digital Knight Bottom Heat Fixture - FREE SHIPPING
|
List Price: $495.00
Our Price: $495.00
Sale Price: $460.35
You Save $34.65
|
|
|
DKA-68BHT
Bottom Heat Fixture
Compatible with DC16, DC16AP, DK8, DK8T
Features
- A bottom heated 6" x 8" platen pedestal is available for the DK8 and DK8T. The separately controlled heat pedestal slides right into the position the standard table is located. This is ideal for thick embriodered appliques, certain lettering transfers, and other heat transfer and fusing applications requiring top and/or bottom heat.
|
|
|
|
|
|
|
|
|
|
|
|
|
Geo Knight Digital Knight 4 x 7 Cap Press - FREE SHIPPING
|
List Price: $595.00
Our Price: $595.00
Sale Price: $553.35
You Save $41.65
|
|
|
DK7
Digital Knight 4x7 Cap Press
The DK7 Cap press is a fully functional cap press for printing the front face of any sized headwear.
The DK7 has a unique hold-down device that pulls the rear strap of the headwear down against the pressing surface, holding the cap in place. The DK7 accepts different sized interchangeable tables (standard size included - see additional accessories below) for accommodating youth & chld sized caps, fitted and low profile caps, and many other items.
Weight: 50 Lbs
Electrical: 450W / 4A / 110V
Dimensions: 19"L x 12"W x 18"H
(add $35 for 220V international)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Geo Knight Digital Knight 4 x 7 Twin Cap Press - FREE SHIPPING
|
List Price: $900.00
Our Price: $900.00
Sale Price: $637.00
You Save $263.00
|
|
|
DK7T
Digital Knight 4x7 Twin Cap Press
The DK7T Twin cap press is a fully functional cap press with a high productivity design. The head pivots back and forth between the two pedestals effortlessly. While one side is pressing, the user is able to set up work on the other pedestal and maximize efficiency.
The DK7T has a unique hold-down device that pulls the rear strap of the headwear down against the pressing surface, holding the cap in place. The DK7T accepts different sized interchangeable tables (standard size included - see additional accessories below) for accommodating youth & chld sized caps, fitted and low profile caps, and many other items.
- Weight: 85 Lbs
- Electrical: 450W / 4A / 110V
- Dimensions: 24"L x 24"W x 24"H
- (add $35 for 220V international)
|
|
|
|
|
|
|
